Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Burgaw
If you heat with a wood stove out on US-117 or down a county road off NC-53, the chimney is the one part of your house you can’t afford to guess about. We sweep chimneys in Burgaw and know what the local housing stock actually looks like: a mix of older brick stacks and, far more often, factory-built metal chimneys on manufactured homes. That changes how the work gets done. A sweep around here starts with pulling the cap and inspecting Class A flue pipe, not just running a brush up a masonry firebox that was never there. Call (855) 947-5166 and we’ll get you booked.
Why Burgaw Homeowners Call Wilmington Chimney Cleaning for Chimney Sweep
Burgaw sits at the crossroads of US-117 and NC-53 in inland Pender County, and a large share of the homes around here are rural farmhouses and 1980s-through-2000s manufactured homes. That means the typical job in Burgaw is Class A chimney inspection, cap and flashing repairs, and creosote removal on flue pipe, not sweeping a brick stack. Masonry fireplaces are comparatively rare in the housing stock. We build our work around that reality instead of treating Burgaw like a suburb of Wilmington.
Our technicians have up to 13 years of experience, and chimney work is all we do. That focus matters on a rural property where the nearest hardware run is a drive and the wrong cap or a substitute flue component can mean a second job. We use professional-grade materials from brands chimney specialists trust, including Gelco and Olympia Chimney, so the part fits your flue rather than the closest off-the-shelf approximation.
One call covers sweep, repair, and inspection, which is exactly what a Burgaw wood-stove owner needs when the chimney is doing real heating work through the damp winter months.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Services in Burgaw
Chimney Services in Burgaw start with figuring out what kind of chimney you actually have before anyone touches it, because a factory-built metal system and an original brick farmhouse stack need different tools, different inspection levels, and different repair paths. A typical annual sweep in Burgaw runs $150-$280, with creosote removal on a glazed flue pipe toward the top of that range. A Level 1 inspection is generally included with the sweep; a Level 2 inspection when you’ve had a storm, changed appliances, or bought the place typically runs $220-$420. Our written estimate sets the final price.
Flue Pipe Creosote Removal
Wood-stove flue pipe glazes faster than a masonry fireplace, and a standard brush won’t cut a tar glaze. We use the tools that do, then confirm with the camera before we call it clean.

Factory Cap and Flashing Reset
On manufactured homes the factory cap is often the only guard at the top. We check it’s seated, sealed, and clear, and reset or replace flashing where it’s pulled loose.

Chimney Sweep Certified in Burgaw
Chimney Sweep Certified in Burgaw means the sweep, the inspection, and any repair recommendation are handled by technicians whose entire trade is chimneys. If you’re burning wood as your main heat, your safe interval is shorter than the textbook once-a-year rule that’s written for occasional fireplace use. Real wood-stove burning in Burgaw often needs the flue checked every season, and sometimes mid-season. Soot removal and a full flue clean typically run $130-$240, and an annual sweep as part of regular upkeep sits in that same band. The written estimate sets the final price.
What the Sweep Covers
We pull the cap, inspect the flue pipe or liner, brush to bare metal where creosote has built up, and check the smoke chamber and damper on any masonry stack we find. You get a clear account of what we found.
When to Book It
Before burning season is the sensible time, and after any coastal storm that’s sent debris over the cap. If you’ve had a fire roar or the draft has gone flat, book sooner rather than later.
Trusted Brands We Service in Burgaw
We work with a curated set of professional-grade chimney brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Those are the materials chimney specialists trust nationwide, not hardware-store substitutes. For a deteriorating flue liner we use HeatShield resurfacing to extend its life without jumping straight to full replacement, and for retrofits and repairs we source DuraFlex flexible liner systems engineered for high-temperature chimney environments. Caps, dampers, and venting components come from Famco and Copperfield. We don’t claim parts stocked on a truck or a local warehouse, so turnaround depends on the part and the job; we’ll tell you honestly what to expect before we book it.
Common Chimney Sweep Problems We See in Burgaw Homes
- Third-degree creosote glaze. Wood-stove flue pipe in a damp Pender County winter glazes hard and fast, and a brush alone won’t remove a tar glaze. It takes the right tools and a camera check to confirm the pipe is clean.
- Storm-clogged caps and spark arrestors. After a nor’easter or hurricane remnant blows through, caps get ripped off and flue tops pack with pine straw and oak leaves from the surrounding timberland. On manufactured homes the factory cap is the only guard up there.
- Rusted metal flues. Wind-driven rain and foggy mornings rust metal flue pipe and eat at seams over time. A rusted section can compromise the flue’s integrity, so it’s worth checking each season.
- Spalling on farmhouse brick. Older brick chimneys around Burgaw show spalling and failed crowns where damp keeps mortar wet. Easy to miss if only the flue pipe gets looked at.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Burgaw, NC
We give real ranges so you can plan. A typical annual sweep in Burgaw runs $150-$280. Soot removal and a flue clean run $130-$240. A Level 2 inspection runs $220-$420, and creosote removal on a heavily glazed flue pipe lands toward the upper end of the sweep range once the extra work is factored in. What moves the number: what kind of chimney you have, how much creosote has built up, whether the cap and flashing need resetting, and whether a storm clogged the top. The written estimate sets the final price, and the estimate itself is free. Nothing is recommended without camera evidence you can see, and if work can wait until next season we’ll say so.
We Also Serve Cities Near Burgaw
We serve homeowners in Burgaw and the communities around it, including Northchase, Skippers Corner, Wrightsboro, and Bayshore. Rural properties often mean a longer drive out, so we book around that and confirm timing when you call. If you’re just outside town and heating with a wood stove, you’re the kind of customer we’re set up for.
Serving Burgaw, NC – Our Local Coverage Area
We serve Burgaw and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Burgaw
If the wood stove is your main heat, plan on an inspection and sweep every season, and sometimes mid-season if you’re burning a lot of unseasoned wood. The textbook annual rule is written for occasional fireplace use and is too loose for real wood-stove heating. Call (855) 947-5166 for an exact quote; the estimate is free.
Yes. A factory-built metal chimney builds creosote just like a masonry one, and its flue pipe can glaze even faster. It also needs cap and flashing checks after storms. Call (855) 947-5166 and we’ll scope it to your system.
Third-degree creosote is a hard, tar-like glaze that a standard brush won’t remove, and it’s the form most likely in wood-stove flue pipe here. It’s a chimney fire risk and needs the right tools plus a camera check to confirm removal. Call (855) 947-5166 for a quote; the estimate is free.
We pull the cap, clear the pine straw and oak leaves, check the cap and spark arrestor for damage, and reset or replace what’s bent or pulled loose. A properly seated factory cap guards the flue top. Call (855) 947-5166 and we’ll get a look at it.
Yes. Burn dry, seasoned wood, keep fires hot enough to burn clean, and avoid long smoldering burns that build glaze on the flue pipe. After every sweep we leave practical burning guidance so the next interval stretches. Call (855) 947-5166 to book a sweep.
Book Your Chimney Sweep in Burgaw
Chimney work is all we do, and one call covers sweep, repair, and inspection. Call (855) 947-5166. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, the written estimate sets the final price, and we work from camera evidence you can see for yourself.
Written by the team at Wilmington Chimney Cleaning.