Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Burgaw, NC
Chimney inspection is the service Burgaw homeowners call us for most, and the reason is the housing itself. Around the US-117 and NC-53 crossroads, much of Pender County’s housing is rural farmhouses with original brick chimneys sitting alongside manufactured homes built from the 1980s through the 2000s with factory-built metal chimneys. Those two systems fail in different ways, and neither one tells you it’s failing until someone looks inside the flue. Our technicians have up to 13 years of experience reading both. Call (855) 947-5166 to book an inspection.
Why Burgaw Homes Are Different
Burgaw’s climate is humid subtropical, with mild winters but a lot of damp, foggy mornings. That combination is hard on a chimney. Moisture sitting in a flue between burns encourages creosote to glaze rather than stay powdery, and it rusts metal flue pipe from the inside out. Hurricane-season wind-driven rain pushes water past caps that were never sealed well to begin with.
The timberland around town adds a second problem. After a nor’easter or a hurricane remnant comes through, we get a run of calls for caps torn off and flue tops packed with pine straw and oak leaves. On manufactured homes this matters more, because the factory cap is often the only thing guarding the flue. Masonry fireplaces are comparatively rare in the rural parts of the county, so the work here leans toward Class A chimney inspections, cap and flashing repair, and creosote removal on flue pipe rather than sweeping brick stacks.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Burgaw Services
Two jobs come up again and again on Burgaw properties: a proper sweep to clear what’s built up in the flue, and repair when storm debris or rust has damaged the cap, flashing, or pipe.
Chimney Sweep in Burgaw
Sweeping a Burgaw chimney usually means working on flue pipe more than brick. Factory-built metal chimneys on manufactured homes need a brush sized to the pipe, and creosote that’s glazed onto damp metal takes more than a light pass. We check the cap and spark arrestor while we’re up there, since pine straw packed into either one is half the reason a flue stops drafting. If your chimney is masonry, the sweep covers the firebox, smoke chamber, and flue together. Learn what a chimney sweep visit includes and how to book one before burning season starts.

Chimney Repair in Burgaw
Repair work in Burgaw tends to be storm-driven and moisture-driven. Caps get ripped off, flashing pulls loose, and rust eats through flue pipe on older metal systems. We work with professional-grade components from brands like Famco and Copperfield for caps, dampers, and venting parts, and DuraFlex flexible liner systems when a flue needs a new interior liner rather than a patch. Where a liner is deteriorating but still structurally sound, HeatShield resurfacing can extend its life without full replacement. Read more about chimney repair and the repair paths we use.

Chimney Inspection in Burgaw
A chimney inspection in Burgaw is a look inside a system most homeowners can’t see, and that’s exactly why it matters here. On the rural farmhouses around US-117 and NC-53, original brick chimneys have had decades of damp winters to develop cracked mortar joints and spalling. On the manufactured homes scattered through the county, factory-built metal flues rust from the inside, and the damage stays hidden behind a cap and a chase cover. A camera inspection tells you which of those situations you’re in, with photo evidence you can look at yourself. That’s what our Chimney Inspection covers: a real look at the flue, not a guess from the ground.
Fireplace Inspection
Signs you need it
Smoke spilling into the room, a firebox that’s pulling weakly, or a fireplace that hasn’t been looked at since you moved in all point to a fireplace inspection.
What it costs in Burgaw
A fireplace inspection typically runs $99 – $199 in Burgaw, and the written estimate sets the final price.
How we do it
We inspect the firebox, damper, smoke chamber, and flue with a camera, check the cap and flashing, and give you a photo report of what we found.
Level 2 Chimney Inspection
Signs you need it
A Level 2 inspection is called for after a chimney fire, a storm that hit the roof, a change of fuel or appliance, or a home purchase.
What it costs in Burgaw
Level 2 inspections typically fall in the $150 – $350 range in Burgaw, with the written estimate setting the final price.
How we do it
We run a camera through the full flue, check accessible portions in attics and crawlspaces, inspect the cap, chase, and flashing, then document everything with photos.
What Chimney Inspection Costs in Burgaw
| Item | Typical range in Burgaw |
|---|---|
| Fireplace inspection | $99 – $199 |
| Level 2 chimney inspection | $150 – $350 |
| Camera inspection with photo report | $99 – $250 |
Do I really need an inspection every year in Burgaw?
An annual inspection is the standard recommendation, and Burgaw’s damp climate makes it a reasonable habit. Rust on metal flues and glazed creosote both develop quietly. A yearly look catches them before they turn into repair work.
Can an inspection find storm damage I can’t see?
Yes. Caps torn loose, flashing that’s shifted, and flue tops packed with debris after a nor’easter all show up on a camera inspection. Call (855) 947-5166 for an exact quote. Estimates are free.
Brands We Service in Burgaw
We work with a curated set of professional-grade chimney brands: DuraFlex flexible liner systems, HeatShield flue resurfacing, Gelco, Olympia Chimney, Famco, and Copperfield. These are the same materials certified chimney professionals use nationwide, not hardware-store substitutes. See our brands for what each one covers. Parts are ordered per job, so turnaround depends on the component.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Burgaw, NC
| Service | Typical range in Burgaw |
|---|---|
| Fireplace inspection | $99 – $199 |
| Level 2 chimney inspection | $150 – $350 |
| Camera inspection with photo report | $99 – $250 |
| Standard chimney sweep | $150 – $300 |
| Creosote removal (heavier buildup) | $200 – $450 |
| Chimney cap replacement | $150 – $400 |
| Flashing repair | $200 – $500 |
| HeatShield liner resurfacing | $1,200 – $2,800 |
| DuraFlex liner installation | $2,000 – $5,000 |
In Burgaw, price moves with the type of chimney. A factory-built metal flue on a manufactured home takes different parts and access than an original brick stack on a farmhouse. Storm damage and rust usually add to a job because more than one component needs attention. We quote upfront from the inspection, and the written estimate sets the final price, so there are no surprises after the work starts.
Neighborhoods We Serve in Burgaw
We cover properties across Burgaw and the surrounding rural stretches of Pender County, including the 28425 area and the roads running out from the US-117 and NC-53 junction. Rural addresses take a little longer to reach than in-town ones, so booking ahead helps. One note for the whole area: after a storm, inspection requests stack up fast.
- Downtown Burgaw
- Properties along US-117
- Properties along NC-53
- Rural farmhouse and manufactured home tracts in Pender County
Service Area – Cities Near Burgaw
Burgaw sits inland from the coast, and we also work the communities around it. If you’re just outside town, there’s a good chance we cover you. Homeowners nearby can book through our pages for Northchase, NC, Skippers Corner, NC, Wrightsboro, NC, and Bayshore, NC. Each area has its own mix of masonry and factory-built chimneys, so the inspection is what tells us which path a job takes.
Serving Burgaw, NC – Our Local Coverage Area
We serve Burgaw and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Burgaw
Yes. We cover rural Pender County properties as well as in-town Burgaw. Rural drives take a bit longer, so booking ahead gives you more flexibility on the day. Call (855) 947-5166. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
It depends on the scope. Most cities require a permit for structural work like a liner replacement, and some repairs don’t need one. Ask the Town of Burgaw’s building department before work starts, and we’ll tell you what our inspection found so you can ask the right question.
Booking ahead is the safest bet, especially after a storm when inspection requests pile up. Call and we’ll book you into the next available opening. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday.
If your Burgaw chimney hasn’t been looked at in a while, or a storm left you wondering what’s sitting on top of your flue, call Wilmington Chimney Cleaning at (855) 947-5166 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burgaw Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Lamont Bryant"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Xavier Hampton"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Sarah Kowalski