Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Murraysville
Chimney sweeping in Murraysville usually means servicing a factory-built fireplace, not a century-old brick flue. Most of the homes here went up in the 1990s and 2000s, and their fireplaces came out of a manufacturer’s catalog with a stainless steel liner and a prefabricated cap already attached. That changes how the work is done, and it’s why a sweep who knows the difference matters. We work with homeowners throughout Murraysville and the surrounding communities, and our technicians have up to 13 years of experience with exactly this kind of system. One call covers the sweep, any repair the inspection turns up, and the inspection itself. Call (855) 947-5166. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Murraysville Homeowners Call Wilmington Chimney Cleaning for Chimney Sweep
Chimney work is all we do. That matters in a town where the fireplace is a modern, sealed appliance with manufacturer-specific parts rather than an open masonry box. When we open a prefab chase on a Murraysville subdivision house, we’re reading a parts diagram and matching a liner and cap to the original system, not just running a brush up a flue. Our technicians have up to 13 years of experience, and that experience is concentrated in this single trade – not split across roofing, gutters, and handyman work.
We work with six recognized professional chimney brands – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – so the cap, damper, or liner we recommend is the right part for your flue, not the closest substitute off a hardware-store shelf. One call covers sweep, repair, and inspection. You don’t coordinate three contractors to get one fireplace back in working order.
Murraysville sits close to the water, and that shapes what we find. Salt air and steady humidity quietly corrode cap screens and dampers on homes that look perfect from the living room. Knowing that going in is half the job. Response to Murraysville is quick – we’re familiar with the streets off Market Street and the newer subdivisions nearby, and we book a window that fits your week.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Maintenance in Murraysville
Chimney maintenance in Murraysville is mostly about keeping a modern prefab system working the way its manufacturer intended. The long coastal cooling season means a Murraysville fireplace can sit unused for months, and that idle stretch is when birds and squirrels move into the flue and damp air starts working on the cap and damper. A maintenance visit typically includes a sweep, a check of the cap, damper, and liner, and a look for water intrusion in the chase. A typical annual sweep and Level 1 inspection in Murraysville runs $180 to $290. A Level 2 inspection, which adds a camera scope of the flue, typically runs $275 to $450. The written estimate sets the final price.
What an Annual Sweep Covers
An annual sweep removes soot and creosote from the flue and firebox, clears any debris or nesting, and confirms the damper opens and closes cleanly. We also check that the cap screen is intact and the chase is shedding water the way it should. For a factory-built fireplace, that annual look is the best way to catch a small problem before it reaches the liner.
Spotting Storm Damage on Prefab Chases
After a nor’easter, the prefabricated caps on Murraysville roofs are the first thing to go. A cap that’s been ripped loose leaves the flue open to rain and animals, and water sitting in the smoke chamber can lead to spalling in the flue tiles if it isn’t resecured quickly. A quick visual check of the cap after a big storm is worth the time.
Chimney Sweep Services in Murraysville
Chimney sweep services in Murraysville cover the full range from a routine annual cleaning to the deeper inspection a newer prefab fireplace sometimes needs. Because most of the housing stock here uses a stainless steel liner inside a factory-built chase, the first task is often identifying the specific system – the liner brand, the cap type, the damper assembly – before any brush goes in. From there we remove soot and creosote, clear nests and debris, and confirm the flue is clear and drafting properly. A typical sweep in Murraysville runs $180 to $290, and a Level 2 camera inspection typically runs $275 to $450. The written estimate sets the final price.
Level 1 and Level 2 Inspections
A Level 1 inspection is a visual check of the accessible parts of the fireplace and flue, and it’s usually enough for an annual maintenance visit on a system that’s working normally. A Level 2 inspection adds a camera run through the flue and is the right call when you’ve moved into a home, changed the appliance, or had a storm event, so you can see the inside of the liner for yourself.

Removing Creosote and Soot
Soot and first-degree creosote come off with a standard brush and a good vacuum. Glazed, third-degree creosote is a different job: it bonds to the liner and won’t budge with a brush, so it needs a chemical approach before the flue is safe to use. We identify which kind you have during the sweep and explain the options before anything is added to the estimate.

Trusted Brands We Service in Murraysville
The parts on a Murraysville fireplace matter as much as the cleaning. We work with a curated set of professional-grade brands – DuraFlex for flexible stainless liner systems, Olympia Chimney for liners and venting, and Famco and Copperfield for caps, dampers, and venting components. These are the same materials used by certified chimney professionals nationwide, not hardware-store substitutes. When your original cap is corroded or your liner needs resurfacing, we match the part to your system rather than forcing a generic fit. We don’t stock parts on a truck; we source the right component for your make and model and turn the repair around quickly. The right part for your flue, not the closest substitute.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Murraysville Homes
- Corroded caps and dampers from salt air. Coastal humidity and salt in the air eat away at cap screens and warp dampers on homes that look fine inside. The damage usually goes unnoticed until water intrusion starts working on the prefabricated chase.
- Third-degree creosote glaze in factory-built liners. Burning unseasoned wood builds a hard, glazed creosote that bonds to the stainless liner and can’t be removed with a standard brush. It’s a fire risk and needs a chemical treatment before the fireplace is used again.
- Storm-driven cap loss. Nor’easters and hurricanes rip prefabricated caps off Murraysville roofs, leaving the flue open to rain and animals. Water sitting in the smoke chamber can cause spalling in the flue tiles if the cap isn’t resecured quickly.
- Nesting during the idle season. With fireplaces unused for months in the long cooling season, birds and squirrels move into open flues. A nest blocks draft and can send smoke back into the living room the first cold night you light a fire.
Pricing for Chimney Sweep in Murraysville, NC
A typical chimney sweep in Murraysville runs $180 to $290 for a standard annual cleaning and Level 1 inspection on a factory-built fireplace. A Level 2 inspection with a camera scope of the flue typically runs $275 to $450. If the inspection turns up a corroded cap, a warped damper, or a liner that needs resurfacing, that repair is priced separately and shown to you in writing before any work begins. What moves the number: the condition of the flue, how much creosote has built up, whether access to the roof or chase is straightforward, and whether the cap or damper needs replacing. Estimates are free, and nothing is recommended without camera evidence you can see for yourself. The written estimate sets the final price – no surprises added after the fact. Call (855) 947-5166 for an exact quote.
We Also Serve Cities Near Murraysville
Murraysville sits just up the road from several communities we serve regularly, including Kings Grant, Bayshore, Porters Neck, and Wilmington itself. If your fireplace is in one of those neighborhoods, the same sweep, repair, and inspection service applies. Our chimney sweep team books a window that fits your week. Call (855) 947-5166 and we’ll get you on the schedule.
Serving Murraysville, NC – Our Local Coverage Area
We serve Murraysville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Murraysville
Yes. A factory-built fireplace that looks new from the living room can still have a corroded cap screen, a warped damper, or a nest in the flue after a long idle season. Newer construction in Murraysville doesn’t mean a clean flue – it means a system with manufacturer-specific parts that need an annual look. Call (855) 947-5166 for an exact quote – estimates are free.
A Level 1 inspection is a visual check of the accessible fireplace and flue, usually enough for an annual maintenance visit on a system that’s working normally. A Level 2 inspection adds a camera run through the flue and is the right call after a move-in, a storm, or an appliance change. The camera lets you see the inside of the liner yourself. Call (855) 947-5166 for an exact quote – estimates are free.
The most common is a prefabricated cap ripped loose or blown off entirely, which leaves the flue open to rain and animals. Water sitting in the smoke chamber can cause spalling in the flue tiles if it isn’t resecured quickly, and a blocked flue drafts poorly. A quick check of the cap after a big storm catches most of it early. Call (855) 947-5166 for an exact quote – estimates are free.
Yes, we sweep factory-built fireplaces with stainless liners, but it does call for the right tools and knowledge of the specific system. The first task is often identifying the liner brand and cap type – DuraFlex or Olympia Chimney, for example – so the brush and any replacement part match the manufacturer’s spec. That’s different from sweeping a masonry flue. Call (855) 947-5166 for an exact quote – estimates are free.
Third-degree creosote is a hard, glazed layer that bonds to the liner and shows up as a shiny, tar-like coating inside the flue. A standard brush won’t remove it, so it needs a chemical treatment before the fireplace is safe to use again. We identify it during the sweep and explain the options in the written estimate. Call (855) 947-5166 for an exact quote – estimates are free.
Written by the team at Wilmington Chimney Cleaning.