Chimney Repair in Burgaw, NC | Wilmington Chimney Cleaning

Chimney Repair in Burgaw - Inspected on Camera, Then Priced in Writing

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Masonry repairMasonry repair
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Burgaw

If you’ve watched a storm peel the cap off your chimney or found water stains spreading across a ceiling, you’re in the right place. Wilmington Chimney Cleaning handles chimney repair in Burgaw for the homes that actually make up this part of Pender County: rural farmhouses with original brick stacks and manufactured homes with factory-built metal chimney systems. Much of the repair work we do here isn’t masonry-heavy rebuilding – it’s cap, flashing and flue-pipe work on Class A systems, plus crown and mortar repair where the stack is brick.

Call (855) 947-5166

We know the drive out US-117 and NC-53, and we know what coastal weather does to a chimney between burns. One call covers sweep, repair, and inspection. Our technicians have up to 13 years of experience. To get started, call (855) 947-5166. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Burgaw Homeowners Call Wilmington Chimney Cleaning for Chimney Repair

Chimney work is all we do. That matters more than it sounds. A general handyman can swap a cap, but reading a flue pipe for rust-through or telling glazed creosote from ordinary soot takes a specialist who looks at chimneys every working day.

We serve homeowners throughout Burgaw and the surrounding county, and we work with a curated set of professional-grade materials from brands chimney specialists trust – Olympia Chimney, Famco, Copperfield and DuraFlex among them. That means the right part for your flue, not the closest hardware-store substitute. Famco and Copperfield supply caps, dampers and venting components that hold up to coastal humidity better than a galvanised factory piece.

Our scope is deliberately narrow: sweep, repair, and inspection under one roof, so you’re not juggling three contractors for one chimney. The repair path is honest, too. We use HeatShield for liner resurfacing – a system designed to extend the life of a deteriorating flue liner without a full replacement, which is often the smarter call on an older brick chimney.

Our technicians have up to 13 years of experience, and their skill set is chimney-focused rather than split across unrelated trades. When we look at a Burgaw chimney, we’re reading it the way a specialist reads it: what’s failing first, what can safely wait, and what genuinely needs fixing before the next fire is lit.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Flashing Repair in Burgaw

Chimney Flashing Repair in Burgaw is one of our most common jobs, and it usually starts with a ceiling stain rather than a chimney problem the homeowner noticed first. Flashing is the metal seal where the chimney meets the roof – the joint that keeps wind-driven rain out. On this coast, damp, foggy mornings and hurricane-season rain push water hard against that joint, and years of it thin the seal until water finds a path inside.

A typical flashing repair in Burgaw runs $250 – $550, depending on whether we’re re-sealing existing flashing or replacing it, and whether the roof pitch makes access slow. On manufactured homes with a metal flue, the flashing collar often fails before the roof does. On brick farmhouse stacks, we’re looking at step flashing and counter-flashing that has lifted or corroded.

Why Flashing Fails Before the Roof Does

The flashing joint flexes with every temperature swing, and coastal humidity speeds up corrosion in the fasteners holding it. When wind-driven rain gets behind a lifted edge, it runs down the chimney chase and shows up as a stain on the ceiling below. Re-sealing or replacing that joint early is far cheaper than repairing the water damage it causes.

Sealing Metal Versus Brick Joints

Metal flue systems on manufactured homes use a different collar-style flashing than brick chimneys, and the sealant and technique aren’t interchangeable. Getting the right material on the right joint is why this isn’t a one-size job. On both, we look for spalling around the joint too – water that’s been getting in for years leaves its mark on the masonry or the metal.

Chimney Crown Repair in Burgaw

Chimney Crown Repair in Burgaw applies specifically to the brick chimneys here – the older single-story farmhouses with original stacks – where the concrete or mortar crown at the top has cracked and started letting water in. The crown is the cap of mortar that sheds rain away from the flue. Once it cracks, water gets into the masonry, freezes on a cold night, and widens the crack, and you get spalling brick and crumbling mortar below.

A typical crown repair in Burgaw runs $350 – $800, depending on the size of the crown, how much of it needs rebuilding versus re-sealing, and access. If the brickwork under the crown is already spalling, that’s a separate mortar job and we’ll quote it honestly rather than bundling it in.

What a Cracked Crown Looks Like From Below

You often can’t see the crown clearly from the ground. Water stains on the chimney breast, crumbling mortar near the top, or a musty smell after rain are the clues. A chimney inspection catches a failing crown before it costs you brickwork.

When the Crown Can Be Sealed and When It Needs Rebuilding

A hairline crack can often be sealed with a flexible crown coating. A crown that’s separated from the flue or crumbling at the edge usually needs rebuilding. We’ll tell you which one your Burgaw chimney needs, and we won’t recommend a rebuild if a seal will hold.

Trusted Brands We Service in Burgaw

We work with a curated roster of professional-grade brands – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – the same materials used by certified chimney professionals nationwide, not hardware-store substitutes. DuraFlex flexible liner systems are built for high-temperature chimney environments and long-term durability, which is what a retrofit or repair on a metal flue demands. HeatShield gives us a repair path for a deteriorating liner without always replacing it. Olympia Chimney, Famco and Copperfield supply the caps, dampers and venting components that survive coastal humidity. We don’t stock parts on a truck or carry inventory locally; we source the right component for your flue and get it to your Burgaw home promptly.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Chimney Repair Problems We See in Burgaw Homes

  • Galvanised factory caps rusted through or blown off. The factory cap on a manufactured-home chimney is often the only guard over the metal flue, and coastal storm remnants tear it loose or bend it. Pine straw and oak leaves from the surrounding timberland pack the flue top, and a stainless replacement is the usual fix rather than a patch.
  • Wind-driven rain past failed flashing. Humid, foggy mornings plus storm rain push water past the flashing on both metal and brick chimneys. It shows up as ceiling stains and spalling mortar before anyone lights a fire.
  • Glazed creosote inside metal flue pipe. Humid air combined with infrequent burns glazes creosote to second- or third-degree tar that a brush can’t touch. It’s usually caught late and needs more than a routine sweep.
  • Cracked crowns and spalling brick on older farmhouse stacks. The original brick chimneys on rural Pender County farmhouses take water through a cracked crown and spall below it. Repointing and tuckpointing the mortar joints is often part of the fix.

Pricing for Chimney Repair in Burgaw, NC

Chimney repair pricing in Burgaw reflects what actually fails here. A typical flashing repair runs $250 – $550; a crown repair runs $350 – $800; mortar repointing and tuckpointing on a brick stack runs $400 – $900 depending on how much joint work is involved. Stainless cap replacements on a metal flue generally run $150 – $400. Chimney waterproofing, which protects brick from the damp that drives most of this, typically runs $300 – $650. What moves the number is the scope – how much has to be replaced versus re-sealed, access, and whether the flue pipe itself is sound. The written estimate sets the final price, and the estimate is free. We don’t recommend a dollar of work without camera evidence you can see for yourself.

We Also Serve Cities Near Burgaw

We serve homeowners in Burgaw and the towns around it. If you’re just outside town, we also cover Northchase, Skippers Corner, Wrightsboro and Bayshore, and the rural stretches between them. The same coastal conditions that rust caps and thin flashing in Burgaw reach all of these communities, and the repair scope on metal flue systems is similar. Call (855) 947-5166 to book a sweep, repair, or inspection anywhere in the area.

Serving Burgaw, NC – Our Local Coverage Area

We serve Burgaw and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Burgaw

Why Burgaw Chooses Wilmington Chimney Cleaning

We set the standard for chimney repair in Burgaw.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Burgaw

Getting your chimney repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Burgaw Customers Say

Trusted by homeowners across Burgaw and surrounding areas.

★★★★★

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

Lamont Bryant
★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Xavier Hampton
★★★★★

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

Sarah Kowalski

Ready for Chimney Repair in Burgaw?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Burgaw.

(855) 947-5166

Request a Free Estimate in Burgaw

Tell us about your chimney repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - We Answer 24/7