Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Burgaw, NC
We provide independent Gelco service across Burgaw, NC, working on factory-built metal chimney systems, caps and fireboxes as they’re actually installed in Pender County homes. What makes our Gelco work here different is simple: in Burgaw, most of the chimneys we see aren’t brick stacks at all. They’re removable-cap flue systems on manufactured homes and older farmhouses, and they fail in ways a masonry sweep won’t catch.
Our technicians have up to 13 years of experience, and chimney work is all we do. One call covers sweep, repair and inspection. Call (855) 947-5166 to book a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Burgaw Residents Choose Us for Gelco Service
Gelco chimneys get looked at from the top down and the bottom up, so we know what their caps, storm collars and flue joints look like when they’re healthy and when they’re not. That day-in, day-out familiarity with the way this equipment goes together is what lets us scope a job honestly instead of defaulting to replacement.
We’re an independent shop, not a manufacturer representative, and there’s no authorization, partnership or warranty endorsement by Gelco behind anything we do. What we bring is the same professional-grade material standard we use across every job: DuraFlex flexible liner systems engineered for high-temperature flue environments, HeatShield for resurfacing deteriorating liners without full replacement, Olympia Chimney, and Famco and Copperfield caps, dampers and venting components. The right part for your flue, not the closest substitute.
We serve homeowners across Burgaw with a focus that isn’t split across unrelated trades. When you book, we confirm what you have, what you’ve noticed, and how to get the right technician to it. To see how we handle Gelco systems in depth, visit our Gelco service page.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Burgaw
These are the Gelco failures we’re called out for most in this part of Pender County. Each one ties back to how a Burgaw chimney actually lives.
- Rust-through on flue sections and cap hardware. Burgaw’s humid subtropical climate brings damp, foggy mornings for a good stretch of the year, and hurricane-season rain drives sideways into metal. Over time that moisture eats at Gelco flue pipe and the bolts holding a cap in place. Rust is often the first thing a Level 2 inspection finds.
- Caps torn off or loosened by storm gusts. Nor’easters and hurricane remnants have a clear run at rural Pender County, and a factory Gelco cap is a small target on a tall stack. When it goes, the flue top is wide open to pine straw and oak leaves from the surrounding timberland. That debris packs down and blocks the flue.
- Glazed, hardened creosote on flue pipe. Mild winters here mean people burn on cool damp days rather than in a long hard freeze, and that pattern builds creosote glaze faster than steady cold-season burning does. Glaze on a Gelco flue is harder to remove than the light soot you’d scrape off a masonry stack, and it’s the fuel a chimney fire feeds on.
- Failed or missing spark arrestors and deteriorated cap screens. A screen that’s rusted through or gone lets embers out and debris in, and on a manufactured home with a factory cap it’s often the only guard at the top. We fit correct-fit replacement screens and arrestors rather than leaving the opening bare.
- Separated flue joints and loose storm collars. Repeated wind loading works at the joints between Gelco sections, and a collar that’s worked loose lets water down into the assembly. Checking joint integrity is a core part of a Level 2 inspection on these systems.
Gelco Service in Burgaw: What Local Conditions Mean for Your Equipment
Burgaw sits at the crossroads of US-117 and NC-53 in inland Pender County, and that location shapes the work. Most of the chimneys here aren’t masonry fireplaces. They’re factory-built metal systems – Gelco Class A insulated sections on manufactured and modular homes, Gelco inserts with their own flue connections, and vented gas fireplace assemblies with vent cap setups. So a Burgaw “cleaning” often means a Level 2 inspection of metal flue pipe, debris removal, creosote removal from the pipe itself, and cap and flashing repair, not sweeping a brick stack.
The timberland around that crossroads matters too. When a nor’easter or hurricane remnant blows through, the calls that follow are usually about caps and flue tops, because a stripped cap on a factory-built chimney is the only thing standing between your flue and a load of pine straw and oak leaves. On older single-story farmhouses with original brick chimneys, the same storm call more often traces to a loose cap screen, a cracked crown or a mortar joint letting water in. Either way, we check before we recommend.
Gelco Models & Products We Service in Burgaw
We service Gelco factory-built metal chimney systems with removable rain caps, the kind common on 1980s-2000s manufactured homes; Gelco Class A insulated chimney sections on manufactured and modular homes; Gelco fireplace inserts and insert flue connections; and Gelco vented gas fireplace and vent cap assemblies.
Because these systems are repaired component by component, the goal is to match what’s on your roof now. Exact-fit OEM caps, storm collars and flue sections are preferred where the original profile is still available. For older factory-built configurations where it isn’t, we turn to quality aftermarket hardware. A rusted cap or collar is a replacement-part job, not grounds to abandon a serviceable chimney. We don’t stock parts on a truck or claim to be a Gelco dealer; we source the right component and fit it.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Burgaw
Every Gelco job is priced per job from a written estimate, and the estimate is free. What drives the number is what we find: whether it’s a routine inspection and creosote removal or storm damage with a missing cap and packed debris, whether the flue sections need component replacement, and how accessible the roofline is. A correctly fitted cap and spark arrestor is a small, defined repair compared with a liner job, which is why the inspection comes first.
| Service | Typical Estimated Range |
|---|---|
| Level 2 Inspection (Gelco flue and cap) | Call for a written estimate |
| Creosote Removal (glazed flue pipe) | Call for a written estimate |
| Cap Replacement with correct-fit cap and arrestor | Call for a written estimate |
We give you the scope and the price in writing before any work starts, and we tell you plainly when something can safely wait. Call (855) 947-5166 for an exact quote – estimates are free.
Serving Burgaw, NC – Our Local Coverage Area
We serve Burgaw and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Burgaw
No. We’re an independent Gelco service provider with no authorization, partnership or warranty endorsement by the manufacturer. We work on Gelco factory-built systems as they’re installed in Pender County homes, and our familiarity with that equipment comes from servicing it season after season.
We prefer exact-fit OEM caps, storm collars and flue sections where the original profile is still available, and turn to quality aftermarket hardware only for older factory-built configurations where it isn’t. Either way it’s professional-grade, not a hardware-store substitute. Call (855) 947-5166 to talk through your system.
A Level 2 inspection with debris and creosote removal on a factory-built system usually fits in a single visit, with cap or collar replacement handled once we’ve confirmed the right component. Storm-damaged jobs with packed flue tops can run longer. We give you a realistic window when you book.
We work on both. Gelco inserts with their own flue connections and Gelco vented gas fireplace and vent cap assemblies are within what we handle alongside wood-burning factory-built chimneys, so a gas insert in a Burgaw home doesn’t send you looking for a separate contractor.
It’s priced per job from a free written estimate, and the final price depends on what the inspection finds – a simple cap replacement costs far less than a storm-damaged flue needing multiple component repairs. We won’t recommend work without showing you the evidence. Call (855) 947-5166 for an exact quote – estimates are free.
Service Areas Near Burgaw
We serve homeowners in Burgaw and the surrounding communities, including Wilmington, Kings Grant, Silver Lake, Myrtle Grove, Wrightsboro and Murraysville. We also work in Burgaw and nearby Northchase and Skippers Corner.
Book Your Gelco Service in Burgaw Today
Whether your Gelco cap is gone after a storm or your flue pipe is overdue for a look, one call covers sweep, repair and inspection. We’ll inspect, show you what we find, and put the price in writing before anything starts. Call (855) 947-5166 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Wilmington Chimney Cleaning.