Chimney Repair in Murraysville, NC | Wilmington Chimney Cleaning

Chimney Repair in Murraysville - Inspected on Camera, Then Priced in Writing

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Masonry repairMasonry repair
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Murraysville

If your chimney cap is gone, your damper won’t close, or mortar is crumbling on the crown, we handle chimney repair in Murraysville without the runaround. We specialize in chimneys only, so the technician who arrives understands prefab flue systems, masonry crowns, and everything in between. Murraysville sits close enough to the coast that salt air and storm weather wear on chimneys faster than many homeowners expect, and the packed subdivisions here make each repair a little different from the next. Call (855) 947-5166 to book a free estimate.

Call (855) 947-5166

Why Murraysville Homeowners Call Wilmington Chimney Cleaning for Chimney Repair

Murraysville is a mix of 1990s and 2000s subdivision houses and older single-story brick ranches along Market Street, and the repair work reflects that split. Prefab fireplaces with stainless steel liners need one kind of attention. Original masonry chimneys need another. Our technicians have up to 13 years of experience working both, and since chimney work is all we do, that experience stays concentrated instead of spread across a dozen unrelated trades.

We book Chimney Repair in Murraysville and the surrounding communities, bringing the same professional-grade materials to a subdivision off Market Street as anywhere else. You get one call for sweep, repair, and inspection rather than coordinating separate contractors. That matters when a cap is missing after a nor’easter and you want somebody who can look at the liner while they’re already up there.

The estimate is free and the price is set per job by the written estimate, so you know the number before anyone starts. Call (855) 947-5166. We answer 24/7. Fast dispatch from 7am to 7pm.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Masonry Repair in Murraysville

Chimney Masonry Repair in Murraysville usually means restoring the brick and mortar on older ranches rather than touching a prefab system. On the original masonry chimneys along Market Street, decades of coastal humidity work on the joints, and spalling brick or a cracked crown lets water straight into the flue. A typical masonry repair here runs $350 to $1,200 depending on how much of the crown and upper stack needs rebuilding, with repointing on its own often landing between $250 and $700. The written estimate sets the final price after we’ve seen the chimney.

Repointing and Tuckpointing

Repointing grinds out failed mortar and packs new mortar into the joints so water stops finding a path behind the brick. It’s the least expensive way to stabilize a chimney that’s still structurally sound. Tuckpointing does the same work on shallower joints where the mortar has only started to weather.

Crown and Brick Rebuilding

When brick has spalled or the crown has cracked through, rebuilding the damaged section is often the only way to keep the flue dry. We rebuild crowns and upper stack sections where the original masonry has broken down, then seal the new work so it sheds water properly.

Chimney Cap Installation in Murraysville

Chimney Cap Installation in Murraysville comes up most often after a nor’easter has torn a cap loose, and it’s one of the simplest repairs with the biggest effect on the flue. A missing cap lets rain straight down the flue and gives birds and squirrels an open door, which is a real problem in a neighborhood where fireplaces sit unused through the long cooling season. Cap installation typically runs $200 to $550 depending on the flue size and the cap style. We fit caps from lines like Gelco and Copperfield, sized to the flue rather than grabbed off a shelf.

Why a Cap Matters More Here

Salt air in the Murraysville area corrodes caps and dampers faster than inland, and once a cap rusts through it stops shedding water. Replacing it protects the flue tiles underneath, which are far more expensive to repair than a cap is to install. After a storm, a quick look at the roofline tells you whether the cap is still seated.

Caps on Factory-Built Flues

Factory-built fireplaces take a specific cap matched to the vent system, and the wrong one can interfere with draft. We match the cap to the existing flue so the appliance vents the way it was designed to.

Trusted Brands We Service in Murraysville

We work with a curated set of professional-grade brands: DuraFlex for flexible liner systems engineered for high-temperature chimney environments, HeatShield for flue resurfacing, and Gelco, Olympia Chimney, Famco, and Copperfield for caps, dampers, and venting components. These are the materials chimney specialists use nationwide, not hardware-store substitutes. When your flue needs a specific part, we source the right one for it rather than the closest thing on the shelf. You won’t find a stocked truck or a warehouse promise here, but you will get the correct component ordered for your chimney and a clear timeline on when the repair can happen. The right part for your flue is worth the short wait.

Common Chimney Repair Problems We See in Murraysville Homes

  • Shared or adjacent flues in attached homes. In Murraysville’s denser subdivisions, back-to-back or side-by-side factory-built fireplaces mean a damaged liner on one side can let exhaust seep sideways and affect a neighbor’s draft. That’s a shared-stack dynamic you don’t see in downtown Wilmington’s detached brick chimneys.
  • Rusted-open dampers from salt air. Coastal humidity and salt corrode dampers until they rust open and stop sealing, letting rain and birds into the flue. Replacing the damper and fitting a proper cap restores the draft and keeps the flue dry.
  • Caps torn off after storms. Hurricanes and nor’easters rip caps loose, and the water-soaked flue tiles underneath often go unnoticed until an inspection turns up the damage. A missing cap is worth checking after every big storm.
  • Spalling mortar and cracked crowns on older brick. The original masonry chimneys on the brick ranches along Market Street weather at the joints and crown faster in this climate, letting water into the liner. Repointing and a new crown keep the flue protected.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Chimney Repair in Murraysville, NC

Chimney repair in Murraysville typically runs $200 to $1,200 depending on the scope of the work. Cap installation sits at the low end, usually $200 to $550, while masonry repair, including repointing and crown rebuilds, tends to fall between $350 and $1,200. Flue liner resurfacing with HeatShield costs more than a cap and less than a full liner replacement, and a full liner replacement is the highest of the lot. What moves the number is access, the condition of the brick, and whether the flue needs resurfacing or just repair. Every estimate is free, and the price you’re quoted in writing is the price that sets the job. Call (855) 947-5166 to book yours.

We Also Serve Cities Near Murraysville

We serve homeowners throughout Murraysville and the nearby communities of Kings Grant, Bayshore, Porters Neck, and Wilmington. If you’re just outside those areas and your chimney needs work, call and we’ll confirm coverage. One call covers sweep, repair, and inspection, and our chimney repair team handles the full range of masonry and prefab work.

Serving Murraysville, NC – Our Local Coverage Area

We serve Murraysville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Murraysville

Book Your Murraysville Chimney Repair

Whether your cap came off in the last storm, your damper has rusted open, or the mortar on an older brick chimney is crumbling, we can look at it and give you a written estimate before any work starts. Nothing gets recommended without evidence you can see. Call (855) 947-5166 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Wilmington Chimney Cleaning.

Why Murraysville Chooses Wilmington Chimney Cleaning

We set the standard for chimney repair in Murraysville.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Murraysville

Getting your chimney repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Murraysville Customers Say

Trusted by homeowners across Murraysville and surrounding areas.

★★★★★

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

Lamont Bryant
★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Xavier Hampton
★★★★★

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

Sarah Kowalski

Ready for Chimney Repair in Murraysville?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Murraysville.

(855) 947-5166

Request a Free Estimate in Murraysville

Tell us about your chimney repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - We Answer 24/7