Chimney Company in Murraysville - Flat-Price Sweep, Findings in Writing

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (855) 947-5166

Flat price quoted before we book

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Chimney Company in Murraysville, NC

Chimney inspection in Murraysville usually starts with a factory-built fireplace, not a masonry one. Most of the housing here went up in the 1990s and 2000s inside 28405, which means prefab fireplaces with stainless steel liners that need to be inspected and maintained rather than swept like old brick. Coastal humidity and salt air do the rest, working on caps and dampers year after year while the fireplace sits idle through the long cooling season. We handle the inspection, the sweep and the repair that follows when something turns up. Call (855) 947-5166 to book a visit.

Call (855) 947-5166

Why Murraysville Homes Are Different

The biggest difference between a Murraysville chimney and one across town is what the flue is made of. In the subdivisions off Market Street, factory-built fireplaces dominate, and those flue systems were engineered as a unit. You inspect them, you keep the cap and damper working, and you watch the liner for corrosion. That is different work from sweeping a century-old masonry chimney in downtown Wilmington, which is only minutes away but a different era entirely.

Some of the older single-story brick ranches along Market Street still have original masonry chimneys, and those do need traditional sweeping on a regular schedule. Coastal humidity and salt air also speed up rust on caps and dampers, and because the cooling season runs long, fireplaces here can sit unused for months at a stretch. An unused flue is an open invitation to birds, squirrels and moisture. After a hurricane or nor’easter, technicians in this part of town often find caps ripped off and water-soaked flue tiles. That storm pattern is a coastal reality mainland cities don’t face, and it’s a good reason to look at the chimney after any big blow.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Our Main Murraysville Services

Homeowners in Murraysville call us about two things more than anything else: getting the flue cleaned and getting whatever the inspection finds put right.

Chimney Sweep in Murraysville

A sweep in most Murraysville homes means cleaning a factory-built flue system carefully, because the stainless liner inside a prefab chimney doesn’t take kindly to rough tools. On the older brick ranches along Market Street, it means the traditional brush-and-vacuum work a masonry flue has always needed. Either way, we remove creosote and any nest debris, and we check the cap and damper while we’re there, since salt air and humidity quietly corrode both. If you want the full picture of how a sweep runs here, see Chimney Sweep in Murraysville.

Chimney Sweep in Murraysville

Chimney Repair in Murraysville

Repairs in Murraysville tend to be about water and wind rather than fire damage. Caps get torn loose in a storm, dampers seize from corrosion, and flue tiles take on moisture when a cap has been missing for a season. We work with professional-grade components from names like Famco and Copperfield for caps and dampers, and we resurface deteriorating liners with HeatShield when replacement isn’t necessary. The details on that work live on Chimney Repair in Murraysville.

Chimney Repair in Murraysville
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 947-5166

Chimney Inspection in Murraysville

Chimney Inspection in Murraysville is mostly about prefab flue systems. In the 1990s and 2000s subdivisions in 28405, the fireplace was built as a factory unit with a stainless steel liner, and those systems age in their own way: the liner corrodes, the cap rusts through, and the damper stops sealing long before anyone notices. That’s the specific problem an inspection solves here. Our technicians have up to 13 years of experience, and a proper Chimney Inspection is where every job on this page begins. Nothing gets recommended until we’ve seen it on camera.

Chimney Flue Inspection

Signs you need it

You need a flue inspection if smoke drifts back into the room, if the fireplace smells musty between seasons, or if the chimney has gone more than a year without anyone looking inside it.

What it costs in Murraysville

A basic inspection typically runs around $125 to $250, depending on how much of the flue we can reach and whether the roof access is straightforward.

How we do it

We run a camera down the flue, check the liner joints and cap from the roof, and photograph what we find so you can see the same thing we do.

Chimney Fire

Signs you need it

You need the flue checked for fire damage if you’ve heard a low roaring sound from the chimney, seen puffy or honeycombed creosote, noticed cracked tiles, or had a chimney fire you put out yourself.

What it costs in Murraysville

Assessing fire damage typically costs $150 to $350 for the inspection itself, with any liner resurfacing or repair quoted separately once we know the extent.

How we do it

We inspect the full flue for heat damage and cracked tiles, then photograph each affected section and explain what can be resurfaced versus what has to be replaced.

What Chimney Inspection Costs in Murraysville

Item Typical range in Murraysville
Basic chimney inspection $125 – $250
Camera inspection with photo report $150 – $300
Post-fire damage assessment $150 – $350

How often should a Murraysville chimney be inspected?

Once a year is the usual pace, and a factory-built fireplace benefits from it even when you barely use it. Sitting idle through a long coastal cooling season is exactly when caps, dampers and liners quietly deteriorate.

What does a camera inspection actually show me?

It shows the inside of your flue: liner condition, joint gaps, creosote buildup and any cracks. You get photo evidence, so a recommendation to repair or resurface comes with something you can look at yourself rather than take on faith.

Brands We Service in Murraysville

Our work draws on professional-grade materials from Olympia Chimney, Famco, Copperfield and DuraFlex, the same kind of components certified chimney professionals install rather than hardware-store substitutes. We don’t claim to stock parts locally; we’ll confirm what your flue needs and the turnaround for getting it. Brand backgrounds are on our brands page.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Chimney Company in Murraysville, NC

Service Typical range in Murraysville
Basic chimney inspection $125 – $250
Camera inspection with photo report $150 – $300
Post-fire damage assessment $150 – $350
Standard chimney sweep $150 – $300
Sweep with inspection $200 – $400
Chimney cap replacement $150 – $450
Damper repair or replacement $200 – $600
HeatShield liner resurfacing $1,200 – $2,800
DuraFlex liner installation $2,000 – $5,500
Crown repair $300 – $900

What pushes a Murraysville price toward the high end is usually access and condition: a steep roofline, a seized damper, or a liner that needs resurfacing rather than a simple clean. Every price we give is set per job by the written estimate, and the estimate is free.

Neighborhoods We Serve in Murraysville

We work across Murraysville and the surrounding stretch of 28405, from the newer subdivisions with factory-built fireplaces to the older brick properties along Market Street. The response note for the area is the same wherever you are: we answer 24/7 and dispatch runs Sunday through Friday, 7am to 7pm. Call and we’ll book your visit into the next opening.

  • Subdivisions off Market Street
  • Brick ranch properties along Market Street
  • Newer suburban homes in the 28405 area
  • Surrounding residential streets in Murraysville

Service Area – Cities Near Murraysville

Murraysville sits close to several communities we cover, and the same coastal humidity and salt air that affect a flue here follow us out to each of them: Kings Grant, NC, Bayshore, NC and Porters Neck, NC. If you’re closer to the city itself, we also serve Wilmington, NC, where the older masonry chimneys need a very different approach from the prefab systems common in Murraysville.

Serving Murraysville, NC – Our Local Coverage Area

We serve Murraysville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Company in Murraysville

Ready to get started? Free estimates in Murraysville
Call (855) 947-5166

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cleaning pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Murraysville Customers Say

★★★★★ 4.8 from 10+ reviews

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

- Lamont Bryant

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

- Xavier Hampton

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

- Sarah Kowalski

How It Works in Murraysville

Getting your chimney cleaning handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney cleaning needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Murraysville. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7